Learning Objectives

Learning Objectives

In this section, you will explore the following questions:

  • What are the four major types of lipids?
  • What are functions of fats in living organisms?
  • What is the difference between saturated and unsaturated fatty acids?
  • What is the molecular structure of phospholipids, and what is the role of phospholipids in cells?
  • What is the basic structure of a steroid, and what are examples of their functions?
  • How does cholesterol help maintain the fluid nature of the plasma membrane of cells?

Connection for AP® Courses

Connection for AP® Courses

Lipids also are sources of energy that power cellular processes. Like carbohydrates, lipids are composed of carbon, hydrogen, and oxygen, but these atoms are arranged differently. Most lipids are nonpolar and hydrophobic. Major types include fats and oils, waxes, phospholipids, and steroids. A typical fat consists of three fatty acids bonded to one molecule of glycerol, forming triglycerides or triacylglycerols. The fatty acids may be saturated or unsaturated, depending on the presence or absence of double bonds in the hydrocarbon chain; a saturated fatty acid has the maximum number of hydrogen atoms bonded to carbon and, thus, only single bonds. In general, fats that are liquid at room temperature, canola oil, tend to be more unsaturated than fats that are solid at room temperature. In the food industry, oils are artificially hydrogenated to make them chemically more appropriate for use in processed foods. During this hydrogenation process, double bonds in the cis- conformation in the hydrocarbon chain may be converted to double bonds in the trans- conformation; unfortunately, trans fats have been shown to contribute to heart disease. Phospholipids are a special type of lipid associated with cell membranes and typically have a glycerol, or sphingosine, backbone to which two fatty acid chains and a phosphate-containing group are attached. As a result, phospholipids are considered amphipathic because they have both hydrophobic and hydrophilic components. In Chapters 4 and 5 we will explore in more detail how the amphipathic nature of phospholipids in plasma cell membranes helps regulate the passage of substances into and out of the cell. Although the molecular structures of steroids differ from that of triglycerides and phospholipids, steroids are classified as lipids based on their hydrophobic properties. Cholesterol is a type of steroid in animal cells’ plasma membrane. Cholesterol is also the precursor of steroid hormones, such as testosterone.

Information presented and the examples highlighted in the section, support concepts outlined in Big Idea 4 of the AP® Biology Curriculum Framework. The learning objectives listed in the Curriculum Framework provide a transparent foundation for the AP® Biology course, an inquiry-based laboratory experience, instructional activities, and AP® exam questions. A Learning Objective merges required content with one or more of the seven Science Practices.

Big Idea 4 Biological systems interact, and these systems and their interactions possess complex properties.
Enduring Understanding 4.A Interactions within biological systems lead to complex properties.
Essential Knowledge 4.A.1 The subcomponents of biological molecules and their sequence determine the properties of that molecule.
Science Practice 7.1 The student can connect phenomena and models across spatial and temporal scales.
Learning Objective 4.1 The student is able to explain the connection between the sequence and the subcomponents of a biological polymer and its properties.
Science Practice 1.3 The student can refine representations and models of natural or man-made phenomena and systems in the domain.
Learning Objective 4.2 The student is able to refine representations and models to explain how the subcomponents of a biological polymer and their sequence determine the properties of that polymer.
Science Practice 6.1 The student can justify claims with evidence.
Science Practice 6.4 The student can make claims and predictions about natural phenomena based on scientific theories and models.
Learning Objective 4.3 The student is able to use models to predict and justify that changes in the subcomponents of a biological polymer affect the functionality of the molecules.

The Science Practices Assessment Ancillary contains additional test questions for this section that will help you prepare for the AP® exam. These questions address the following standards:

  • [APLO 2.9]
  • [APLO 2.10]
  • [APLO 2.12]
  • [APLO 2.13]
  • [APLO 2.14]
  • [APLO 4.14]

Fats and Oils

Fats and Oils

Lipids include a diverse group of compounds that are largely nonpolar in nature. This is because they are hydrocarbons that include mostly nonpolar carbon–carbon or carbon–hydrogen bonds. Nonpolar molecules are hydrophobic, or water fearing, or insoluble in water. Lipids perform many different functions in a cell. Cells store energy for long-term use in the form of fats. Lipids also provide insulation from the environment for plants and animals (Figure 3.13). For example, their water-repellant hydrophobic nature can help keep aquatic birds and mammals dry by forming a protective layer over fur or feathers. Lipids are also the building blocks of many hormones and an important constituent of all cellular membranes. Lipids include fats, waxes, phospholipids, and steroids.

Photo shows a river otter swimming.
Figure 3.13 Hydrophobic lipids in the fur of aquatic mammals, such as this river otter, protect them from the elements. (credit: Ken Bosma)

A fat molecule consists of two main components: glycerol and fatty acids. Glycerol is an organic compound (alcohol) with three carbons, five hydrogens, and three hydroxyl (OH) groups. Fatty acids have a long chain of hydrocarbons to which a carboxyl group is attached, hence the name fatty acid. The number of carbons in the fatty acid may range from four to 36; most common are those containing 12–18 carbons. In a fat molecule, the fatty acids are attached to each of the three carbons of the glycerol molecule with an ester bond through an oxygen atom (Figure 3.14).

The structures of glycerol, a fatty acid, and a triacylglycerol are shown. Glycerol is a chain of three carbons, with a hydroxyl (OH) group attached to each carbon. A fatty acid has an acetyl (COOH) group attached to a long carbon chain. In triacylglycerol, a fatty acid is attached to each of glycerol’s three hydroxyl groups via the carboxyl group. A water molecule is lost in the reaction so the structure of the linkage is C-O-C, with an oxygen double bonded to the second carbon.
Figure 3.14 Triacylglycerol is formed by the joining of three fatty acids to a glycerol backbone in a dehydration reaction. Three molecules of water are released in the process.

During this ester bond formation, three water molecules are released. The three fatty acids in the triacylglycerol may be similar or dissimilar. Fats are also called triacylglycerols or triglycerides because of their chemical structure. Some fatty acids have common names that specify their origin. For example, palmitic acid, a saturated fatty acid, is derived from the palm tree. Arachidic acid is derived from Arachis hypogea, the scientific name for groundnuts or peanuts.

Fatty acids may be saturated or unsaturated. In a fatty acid chain, if there are only single bonds between neighboring carbons in the hydrocarbon chain, the fatty acid is said to be saturated. Saturated fatty acids are saturated with hydrogen; in other words, the number of hydrogen atoms attached to the carbon skeleton is maximized. Stearic acid is an example of a saturated fatty acid (Figure 3.15).

The structure of stearic acid is shown. This fatty acid has a hydrocarbon chain seventeen residues long attached to an acetyl group. All bonds between the carbons are single bonds.
Figure 3.15 Stearic acid is a common saturated fatty acid.

When the hydrocarbon chain contains a double bond, the fatty acid is said to be unsaturated. Oleic acid is an example of an unsaturated fatty acid (Figure 3.16).

The structure of oleic acid is shown. This fatty acid has a hydrocarbon chain seventeen residues long attached to an acetyl group. The bond between carbon eight and carbon nine is a double bond.
Figure 3.16 Oleic acid is a common unsaturated fatty acid.

Most unsaturated fats are liquid at room temperature and are called oils. If there is one double bond in the molecule, then it is known as a monounsaturated fat, such as olive oil; if there is more than one double bond, then it is known as a polyunsaturated fat, such as canola oil.

When a fatty acid has no double bonds, it is known as a saturated fatty acid because no more hydrogen may be added to the carbon atoms of the chain. A fat may contain similar or different fatty acids attached to glycerol. Long straight fatty acids with single bonds tend to get packed tightly and are solid at room temperature. Animal fats with stearic acid and palmitic acid, common in meat, and the fat with butyric acid, common in butter, are examples of saturated fats. Mammals store fats in specialized cells called adipocytes, where globules of fat occupy most of the cell’s volume. In plants, fat or oil is stored in many seeds and is used as a source of energy during seedling development. Unsaturated fats or oils are usually of plant origin and contain cis unsaturated fatty acids. Cis and trans indicate the configuration of the molecule around the double bond. If hydrogens are present in the same plane, it is referred to as a cis fat; if the hydrogen atoms are on two different planes, it is referred to as a trans fat. The cis double bond causes a bend or a kink that prevents the fatty acids from packing tightly, keeping them liquid at room temperature (Figure 3.17). Olive oil, corn oil, canola oil, and cod liver oil are examples of unsaturated fats. Unsaturated fats help to lower blood cholesterol levels, whereas saturated fats contribute to plaque formation in the arteries.

A comparison of saturated and unsaturated fatty acids is shown. Stearic acid, a saturated fatty acid, has a hydrocarbon chain seventeen residues long attached to an acetyl group. Oleic acid also has a seventeen-residue hydrocarbon chain, but a double bond exists between the eighth and ninth carbon in the chain. In cis oleic acid, the hydrogens are on the same side of the double bond. In trans oleic acid, they are on opposite sides.
Figure 3.17 Saturated fatty acids have hydrocarbon chains connected by single bonds only. Unsaturated fatty acids have one or more double bonds. Each double bond may be in a cis or trans configuration. In the cis configuration, both hydrogens are on the same side of the hydrocarbon chain. In the trans configuration, the hydrogens are on opposite sides. A cis double bond causes a kink in the chain.

Trans Fats

In the food industry, oils are artificially hydrogenated to make them semi-solid and of a consistency desirable for many processed food products. Simply speaking, hydrogen gas is bubbled through oils to solidify them. During this hydrogenation process, double bonds of the cis- conformation in the hydrocarbon chain may be converted to double bonds in the trans- conformation.

Margarine, some types of peanut butter, and shortening are examples of artificially hydrogenated trans fats. Recent studies have shown that an increase in trans fats in the human diet may lead to an increase in levels of low-density lipoproteins (LDL), or bad cholesterol, which in turn may lead to plaque deposition in the arteries, resulting in heart disease. Many fast food restaurants have recently banned the use of trans fats, and food labels are required to display the trans fat content.

Omega Fatty Acids

Essential fatty acids are fatty acids required but not synthesized by the human body. Consequently, they have to be supplemented through ingestion via the diet. Omega-3 fatty acids, like that shown in Figure 3.18, fall into this category and are one of only two known for humans—the other being omega-6 fatty acid. These are polyunsaturated fatty acids and are called omega-3 because the third carbon from the end of the hydrocarbon chain is connected to its neighboring carbon by a double bond.

The molecular structures of alpha-linolenic acid, an omega-3 fatty acid is shown. Alpha-linolenic acid has three double bonds located eight, eleven, and fourteen residues from the acetyl group. It has a hooked shape.
Figure 3.18 Alpha-linolenic acid is an example of an omega-3 fatty acid. It has three cis double bonds and, as a result, a curved shape. For clarity, the carbons are not shown. Each singly bonded carbon has two hydrogens associated with it, also not shown.

The farthest carbon away from the carboxyl group is numbered as the omega (ω) carbon, and if the double bond is between the third and fourth carbon from that end, it is known as an omega-3 fatty acid. Nutritionally important because the body does not make them, omega-3 fatty acids include alpha-linoleic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), all of which are polyunsaturated. Salmon, trout, and tuna are good sources of omega-3 fatty acids. Research indicates that omega-3 fatty acids reduce the risk of sudden death from heart attacks, reduce triglycerides in the blood, lower blood pressure, and prevent thrombosis by inhibiting blood clotting. They also reduce inflammation, and may help reduce the risk of some cancers in animals.

Like carbohydrates, fats have received a lot of bad publicity. It is true that eating an excess of fried foods and other fatty foods leads to weight gain. However, fats do have important functions. Many vitamins are fat soluble, and fats serve as a long-term storage form of fatty acids, which are a source of energy. They also provide insulation for the body. Therefore, healthy fats in moderate amounts should be consumed on a regular basis.

Science Practice Connection for AP® Courses

Think About It

Explain why trans fats have been banned from some restaurants. How are trans fats made, and what effect does a simple chemical change have on the properties of the lipid?

Waxes

Waxes

Wax covers the feathers of some aquatic birds and the leaf surfaces of some plants. Because of the hydrophobic nature of waxes, they prevent water from sticking on the surface (Figure 3.19). Waxes are made up of long fatty acid chains esterified to long-chain alcohols.

The photo shows leaves on a plant; the leaves appear thick, shiny, and waxy.
Figure 3.19 Waxy coverings on some leaves are made of lipids. (credit: Roger Griffith)

Phospholipids

Phospholipids

Phospholipids are major constituents of the plasma membrane, the outermost layer of animal cells. Like fats, they are composed of fatty acid chains attached to a glycerol or sphingosine backbone. Instead of three fatty acids attached as in triglycerides, there are two fatty acids forming diacylglycerol, and the third carbon of the glycerol backbone is occupied by a modified phosphate group (Figure 3.20). A phosphate group alone attached to a diaglycerol does not qualify as a phospholipid; it is phosphatidate (diacylglycerol 3-phosphate), the precursor of phospholipids. The phosphate group is modified by an alcohol. Phosphatidylcholine and phosphatidylserine are two important phospholipids that are found in plasma membranes.

The molecular structure of a phospholipid is shown. It consists of two fatty acids attached to the first and second carbons in glycerol, and a phosphate group attached to the third position. The phosphate group may be further modified by addition of another molecule to one of its oxygens. Two molecules that may modify the phosphate group, choline and serine, are shown. Choline consists of a two-carbon chain with a hydroxy group attached to one end and a nitrogen attached to the other. The nitrogen, in turn, has three methyl groups attached to it and has a charge of plus one. Serine consists of a two-carbon chain with a hydroxyl group attached to one end. An amino group and a carboxyl group are attached to the other end.
Figure 3.20 A phospholipid is a molecule with two fatty acids and a modified phosphate group attached to a glycerol backbone. The phosphate may be modified by the addition of charged or polar chemical groups. Two chemical groups that may modify the phosphate, choline, and serine, are shown here. Both choline and serine attach to the phosphate group at the position labeled R via the hydroxyl group indicated in green.

A phospholipid is an amphipathic molecule, meaning it has a hydrophobic and a hydrophilic part. The fatty acid chains are hydrophobic and cannot interact with water, whereas the phosphate-containing group is hydrophilic and interacts with water (Figure 3.21).

An illustration of a phospholipids bilayer is shown. The phospholipids bilayer consists of two layers of phospholipids. The hydrophobic tails of the phospholipids face one another while the hydrophilic head groups face outward.
Figure 3.21 The phospholipid bilayer is the major component of all cellular membranes. The hydrophilic head groups of the phospholipids face the aqueous solution. The hydrophobic tails are sequestered in the middle of the bilayer.

The head is the hydrophilic part, and the tail contains the hydrophobic fatty acids. In a membrane, a bilayer of phospholipids forms the matrix of the structure, the fatty acid tails of phospholipids face inside, away from water, whereas the phosphate group faces the outside, aqueous side (Figure 3.21).

Phospholipids are responsible for the dynamic nature of the plasma membrane. If a drop of phospholipids is placed in water, it spontaneously forms a structure known as a micelle, where the hydrophilic phosphate heads face the outside and the fatty acids face the interior of this structure.

Everyday Connection for AP® Courses

Fats are amphiphilic molecules. In other words, the long hydrocarbon tail is hydrophobic, and the glycerol part of the molecule is hydrophilic. When in water, fats will arrange themselves into a ball called a micelle so that the hydrophilic heads are on the outer surface, and the hydrophobic tails are on the inside where they are protected from the surrounding water.

An illustration shows a circular arrangement of hydrocarbons with the hydrophilic head at the outer circumference, and the hydrophobic tails all pointing toward the centre of the circle. This arrangement allows the micelle to remain in suspension in an aqueous medium. A few water molecules are shown surrounding the micelle, unable to pass through the membrane.
Figure 3.22

Steroids

Steroids

Unlike the phospholipids and fats discussed earlier, steroids have a fused ring structure. Although they do not resemble the other lipids, they are grouped with them because they are also hydrophobic and insoluble in water. All steroids have four linked carbon rings and several of them, like cholesterol, have a short tail (Figure 3.23). Many steroids also have the –OH functional group, which puts them in the alcohol classification (sterols).

The structures of cholesterol and cortisol are shown. Each of these molecules is composed of three six-carbon rings fused to a five-carbon ring. Cholesterol has a branched hydrocarbon attached to the five-carbon ring, and a hydroxyl group attached to the terminal six-carbon ring. Cortisol has a two-carbon chain modified with a double-bonded oxygen, a hydroxyl group attached to the five-carbon ring, and an oxygen double-bonded to the terminal six-carbon ring.
Figure 3.23 Steroids, such as cholesterol and cortisol, are composed of four fused hydrocarbon rings.

Cholesterol is the most common steroid. Cholesterol is mainly synthesized in the liver and is the precursor to many steroid hormones such as testosterone and estradiol, which are secreted by the gonads and endocrine glands. It is also the precursor to vitamin D. Cholesterol is also the precursor of bile salts, which help in the emulsification of fats and their subsequent absorption by cells. Although cholesterol is often spoken of in negative terms by lay people, it is necessary for proper functioning of the body. It is a component of the plasma membrane of animal cells and is found within the phospholipid bilayer. Being the outermost structure in animal cells, the plasma membrane is responsible for the transport of materials and cellular recognition and it is involved in cell-to-cell communication.

Link to Learning

QR Code representing a URL

For an additional perspective on lipids, explore the interactive animation Biomolecules: The Lipids.

What is cholesterol specifically classified as?
  1. a lipid
  2. a phospholipid
  3. a steroid
  4. a wax

Disclaimer

This section may include links to websites that contain links to articles on unrelated topics.  See the preface for more information.