Home
Published on Texas Gateway (https://texascourses.org)
i

Website Maintenance Notice

We’re currently performing scheduled maintenance to update and improve our site. Some content may be temporarily unavailable as we retire legacy materials that no longer meet current standards. Thank you for your patience as we work to enhance your experience.
Section Summary

17.1 Sound

  • Sound is a disturbance of matter that is transmitted from its source outward.
  • Sound is one type of wave.
  • Hearing is the perception of sound.

17.2 Speed of Sound, Frequency, and Wavelength

The relationship of the speed of sound vw,vw, size 12{v size 8{w}} {} its frequency f,f, size 12{f} {} and its wavelength λλ size 12{λ} {} is given by

vw=fλ,vw=fλ,

which is the same relationship given for all waves.

In air, the speed of sound is related to air temperature TT size 12{T} {} by

vw=331m/sT273K.vw=331m/sT273K.

vwvw size 12{v size 8{w}} {} is the same for all frequencies and wavelengths.

17.3 Sound Intensity and Sound Level

  • Intensity is the same for a sound wave as was defined for all waves; it is

    I=PA,I=PA, size 12{I= { {P} over {A} } } {}

    where PP is the power crossing area AA. The SI unit for II is watts per meter squared. The intensity of a sound wave is also related to the pressure amplitude ΔpΔp

    I= (Δp) 2 2 ρv w ,I= (Δp) 2 2 ρv w , size 12{I= { { left (Δp right )} over {2 ital "pv" size 8{m}} } rSup {2} } {}

    where ρρ size 12{p} {} is the density of the medium in which the sound wave travels and vwvw size 12{p} {} is the speed of sound in the medium.

  • Sound intensity level in units of decibels (dB) is

    βdB=10log10II0,βdB=10log10II0, size 12{β left ("dB" right )="10""log" rSub { size 8{"10"} } left ( { {I} over {I rSub { size 8{0} } } } right )} {}

    where I0 = 10 –12 W/ m2 I0 = 10 –12 W/ m2 is the threshold intensity of hearing.

17.4 Doppler Effect and Sonic Booms

  • The Doppler effect is an alteration in the observed frequency of a sound due to motion of either the source or the observer.
  • The actual change in frequency is called the Doppler shift.
  • A sonic boom is constructive interference of sound created by an object moving faster than sound.
  • A sonic boom is a type of bow wake created when any wave source moves faster than the wave propagation speed.
  • For a stationary observer and a moving source, the observed frequency fobsfobs size 12{f rSub { size 8{"obs"} } } {} is
    fobs=fsvwvw±vs,fobs=fsvwvw±vs, size 12{f rSub { size 8{"obs"} } =f rSub { size 8{s} } left ( { {v rSub { size 8{w} } } over {v rSub { size 8{w} } +- v rSub { size 8{s} } } } right )} {}
    where fsfs size 12{f rSub { size 8{s} } } {} is the frequency of the source, vsvs size 12{v rSub { size 8{s} } } {} is the speed of the source, and vwvw size 12{v rSub { size 8{w} } } {} is the speed of sound. The minus sign is used for motion toward the observer and the plus sign for motion away.
  • For a stationary source and moving observer, the observed frequency is
    fobs=fsvw±vobsvw,fobs=fsvw±vobsvw, size 12{f rSub { size 8{"obs"} } =f rSub { size 8{s} } left ( { {v rSub { size 8{w} } +- v rSub { size 8{"obs"} } } over {v rSub { size 8{w} } } } right )} {}
    where vobsvobs size 12{v rSub { size 8{"obs"} } } {} is the speed of the observer.

17.5 Sound Interference and Resonance: Standing Waves in Air Columns

  • Sound interference and resonance have the same properties as defined for all waves.
  • In air columns, the lowest-frequency resonance is called the fundamental, whereas all higher resonant frequencies are called overtones. Collectively, they are called harmonics.
  • The resonant frequencies of a tube closed at one end are
    fn=nvw4L ,  n=1, 3, 5...fn=nvw4L ,  n=1, 3, 5... size 12{n=1,3,5 "." "." "." } {}
    where f1f1 size 12{f rSub { size 8{1} } } {} is the fundamental and LL size 12{L} {} is the length of the tube.
  • The resonant frequencies of a tube open at both ends are
    fn=nvw2L ,  n=1, 2, 3...fn=nvw2L ,  n=1, 2, 3... size 12{n=1,3,5 "." "." "." } {}

17.6 Hearing

  • The range of audible frequencies is 20 to 20,000 Hz.
  • Those sounds above 20,000 Hz are ultrasound, whereas those below 20 Hz are infrasound.
  • The perception of frequency is pitch.
  • The perception of intensity is loudness.
  • Loudness has units of phons.

17.7 Ultrasound

  • The acoustic impedance is defined as
    Z=ρv,Z=ρv,
    where ρρ is the density of a medium through which the sound travels and vv is the speed of sound through that medium.
  • The intensity reflection coefficient a,a, a measure of the ratio of the intensity of the wave reflected off a boundary between two media relative to the intensity of the incident wave, is given by
    a = Z 2 − Z 1 2 Z 1 + Z 2 2 . a = Z 2 − Z 1 2 Z 1 + Z 2 2 . size 12{a= { { left (Z rSub { size 8{2} } - Z rSub { size 8{1} } right ) rSup { size 8{2} } } over { left (Z rSub { size 8{1} } +Z rSub { size 8{2} } right ) rSup { size 8{2} } } } } {}
  • The intensity reflection coefficient is a unitless quantity.